Dear all, I just finished a DSC3 . for starting I want to used an Amanero Combo384 that I have already with PC Windows 10 64bit + AIMP Software or Foobar2000, but no sound, led not bright, seams that no DSD is sending.
So can you tell me what firmware do you used for the Amanero card with PC Windows ? how do you send a .DSF file to USB ? I have try the Slave_for_1081 + firmware_2006be11 and it doesn't work.
thanks for your help.
So can you tell me what firmware do you used for the Amanero card with PC Windows ? how do you send a .DSF file to USB ? I have try the Slave_for_1081 + firmware_2006be11 and it doesn't work.
thanks for your help.
1081 and 2006be11 should work, I had it with both dsc2 and dsc3.
Do you set up the slave mode, 1/2 clock division under the tool?
Do you set up the slave mode, 1/2 clock division under the tool?
By the way, are you having the latest revision of combo384 with tiny cpld chip?
If that's the case you need some special firmware to support slave mode with 45/49M clock, ask Dom directly.
If that's the case you need some special firmware to support slave mode with 45/49M clock, ask Dom directly.