All I can say is that your crafstmanship is truely inspiring!!!
Certainly gives one something to aspire to 🙂
Tony.
Certainly gives one something to aspire to 🙂
Tony.
A few works (drilling, painting, placeing thramal grease between cooper and heatsinks)
The zenquito come slowly to live
The turn on card with soft start, on/off push circuit, and a 12V power supply for the speakers protection system against CC.
Marc
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
The zenquito come slowly to live
An externally hosted image should be here but it was not working when we last tested it.
The turn on card with soft start, on/off push circuit, and a 12V power supply for the speakers protection system against CC.
An externally hosted image should be here but it was not working when we last tested it.
Marc
manu67 said:
Thanks Voisin,
I have some news. My amp is finished and i made first listening seance today late afternoon.
I Have few pbs during the end of construction. I exploded one Capa (BC C154 22000µF/40V), oune Pi resistor 1R 25W, and i have some pbs with the turn on system. All these are resolved. here are some pics of definitf wiring :
An externally hosted image should be here but it was not working when we last tested it.
New Pi resistors :
- 0.22R 50W/secondary for rear and central ch
- 0.22R 25W/secondary/amp card => 4 for 2 cards
An externally hosted image should be here but it was not working when we last tested it.
Here is my HP CC protection System with relay card and detection card
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Central front and rear ch are polarized in AB classe with 50W output power : 220mA 0V offset
Front Ch are polarized up to 20W in A class than up to 50W in AB class : 1.12A 0V offset.
Marc
Here it's : My zenquito is born, my english is too poor for a long explication how it sound. But it's really amazing how it can give bass rapid and strong. The sound is large, detailed at all frequencies. A lot of Pleasure.
Marc
Marc
can you say to me what you put like protection system? you have a diagram or an article?
I have a "son of Zen" which functions in +-12V with 4 batteries of 19Ah and I will be made "monster" of hiraga !
I have a "son of Zen" which functions in +-12V with 4 batteries of 19Ah and I will be made "monster" of hiraga !
- Status
- Not open for further replies.