True. But the shaft is longer to keep the shield about 1,2mm apart from the chassis. And I am pretty sure that the powder coated shield is not that conductive either.
Nevertheless, a clean and robust build is always a good idea.
Plus one point to my thought of using wood for the bottom instead of aluminum 🙂
Nevertheless, a clean and robust build is always a good idea.
Plus one point to my thought of using wood for the bottom instead of aluminum 🙂
Last edited:
I recently started work on this again after a brief 6month break 🙂
I will come back with more photos soon
I will come back with more photos soon
Glad to see your return!
Some projects take longer than you plan. 🙂 🙂 🙂
(Ask me sometime about my 300B amp that has been a 10yr project...)
Some projects take longer than you plan. 🙂 🙂 🙂
(Ask me sometime about my 300B amp that has been a 10yr project...)
Well I ended up without a preamp, so I had to fill in that spot first to be able to continue enjoying music 🙂
Plus I am also working on a transport, a phono, a turntable and a pair of speakers and I am optimizing my DCB1. Not to mention work and my attempts to get a proper social life, so it still might take a while 🙂
Plus I am also working on a transport, a phono, a turntable and a pair of speakers and I am optimizing my DCB1. Not to mention work and my attempts to get a proper social life, so it still might take a while 🙂
No sound always loses the "sound competition".
Sometimes no sound wins the "sound quality competition" !!!!
Sometimes no sound wins the "sound quality competition" !!!!
You might want to check out this F5 build, for chassis ideas:
http://www.diyaudio.com/forums/pass...-music-different-drummer.html?highlight=music
Yep. Already read that thread many times 🙂
Quick thought about the blue leds. In my experience, super bright leds can have significant effect on the sound, even if they are way away from the signal. Try disconnecting them to see how it affects your build
Last edited:
- Status
- Not open for further replies.