I have a late 80s Yamha P-2250C Power Amplifier that uses a IDEC MSJU-24VDC for the output protection am looking for some relays to replace the ones I have the coil resistance is around 592 Ohms.
Would like to buy some if anyone has any.
Thjanks for your time and consideration
Would like to buy some if anyone has any.
Thjanks for your time and consideration
Last edited:
https://www.ebay.co.uk/itm/144284123898
Advertised at a grossly inflated price but if you want one and don't want to check out Mouser or other suppliers, it will do.
Advertised at a grossly inflated price but if you want one and don't want to check out Mouser or other suppliers, it will do.
Judging from the listing it is salvaged from a used amplifier.
I would buy a new relay and build a raiser board if necessary.
In you can do as suggested, purchase a 24v DC coil relay with N/O contacts.
If I couldn't find one with the same footprint, I would fit something like this;
https://uk.rs-online.com/web/p/power-relays/7495130?gb=s
If I couldn't find one with the same footprint, I would fit something like this;
https://uk.rs-online.com/web/p/power-relays/7495130?gb=s
That one seems to have two contacts in series? Why not use a SPDT (two of them) or a DPDT relay?
Whoops, wrong link!
https://uk.rs-online.com/web/p/power-relays/2857077
is what I meant.
DPDT 24v DC coil.
https://uk.rs-online.com/web/p/power-relays/2857077
is what I meant.
DPDT 24v DC coil.
I would like to thank everyone for all your help and assistance much appreciated.
John
John