• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

x2 DIY Projector LCD 12.1" Slimage 400a

Status
Not open for further replies.
Jump to Latest
N

NeMeSiS_singh

Member
Joined 2005
#1
hi,

i recently purchased 2 12.1" lcd monitors from ebay that were badged digipos but manufactured by slimage.

I took one apart and it has all the right ffc cable lengths and nothing is in the way of the actual lcd once opened but i also at the same time won a CTX ezpro 550 projector for the same price of the two lcd monitors. I chose the projector out of the two as it already runs on ohp halogen lamps and is more than enough for me.

so im left with these two tft monitors, the one that was openeded has been put back together so its all good to go. They both work, no dead pixels or flaws.

Only 30gbp each + 10gbp in the uk for postage.

cheers
nemesis
 
#7
ok,

These panels are suitable for your diy projector job, the ffc cables are right length to keep all the boards out of the way. They are:

800x600 @ 75hz
16.7m colours
150:1 contrast ratio
150cd/m2 brightness

Absolutley great when running resolution at 800x480 for a 16:9 aspect ratio.

yes, im in the uk. I live in Berkshire. It is 10gbp for postage.

cheers

I also have a ASK impact wsx projection panel if anyones interested. it does 1280x1024!!!
THAT means it can do HDTV 720p resolution of 1280x720. Im asking for a fair offer for it, if anyone is interested.
 
Status
Not open for further replies.
Top Bottom