Hi everyone
I have a pair of Thiel SCS monitors that I just picked up that need replacement tweeters
The SCS uses a coax driver from Seas *(the 17RE series, 170mm , 2 way , see attached spec sheet)
The tweeter uses a 26mm fabric dome, with neo magnet that fits in the voice coil opening- the woofer cone acts as a horn for the tweeter, *(see attached photo)
The tweeters are easy to remove with only a slight push from behind
Anyone have a pair of tweeters?
* ( I believe that the correct tweeter model is 25TFFN/X)
Much thx
SW
I have a pair of Thiel SCS monitors that I just picked up that need replacement tweeters
The SCS uses a coax driver from Seas *(the 17RE series, 170mm , 2 way , see attached spec sheet)
The tweeter uses a 26mm fabric dome, with neo magnet that fits in the voice coil opening- the woofer cone acts as a horn for the tweeter, *(see attached photo)
The tweeters are easy to remove with only a slight push from behind
Anyone have a pair of tweeters?
* ( I believe that the correct tweeter model is 25TFFN/X)
Much thx
SW
Attachments
What happens when the metal back is removed ? Can you put it on the equivalent Seas standalone tweeter G version unit from the catalog ? It is probaly feasible to remove the plastic housing of the G unit and adapt with what you remove of your former X version...
Though one should know if the TFFN/X is 4 ohms as well.
Though one should know if the TFFN/X is 4 ohms as well.
https://www.amazon.com/Seas-Prestige-27TFFN-Textile-H1396-04/dp/B00UCJLA7G
Look at the back in the pictures... core form seems similar to your unit .... surgery to remove the plastic suround then adapt ? Look at the simples clips at the back....
Look at the back in the pictures... core form seems similar to your unit .... surgery to remove the plastic suround then adapt ? Look at the simples clips at the back....
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.