Does anyone want to take a crack at that?
For those curious, I still haven't started my first project yet. But, I just received an Asus Xonar D1 sound card today.
For those curious, I still haven't started my first project yet. But, I just received an Asus Xonar D1 sound card today.
Pretty sure it has already been done WFRW, but WFR is what the new Manzanita design is all about.
Usually any of the 3inch drivers will work from 300 and up. Dave will probably jump in with a plug for the Fostex drivers ( I wish I could afford a set of those) bit of reinventing the wheel question really
Usually any of the 3inch drivers will work from 300 and up. Dave will probably jump in with a plug for the Fostex drivers ( I wish I could afford a set of those) bit of reinventing the wheel question really
http://www.diyaudio.com/forums/css/176790-el166-mtm-ml-tl.html
We've been talking about SDX7x2+the new, even better, FF85wKeN. next
The concept is sound and with lots of good midbasses and small FRs the options are many.
dave
We've been talking about SDX7x2+the new, even better, FF85wKeN. next
The concept is sound and with lots of good midbasses and small FRs the options are many.
dave
I've done this recently with a 2" FR Tang Band driver and two 6" woofers. This allows me to set the crossover point well below 1000 Hz (750 Hz), which helps to get around some response issues.
TB W2-800SL FR and distoration measurement plots
-Charlie
TB W2-800SL FR and distoration measurement plots
-Charlie
I've done this recently with a 2" FR Tang Band driver and two 6" woofers. This allows me to set the crossover point well below 1000 Hz (750 Hz), which helps to get around some response issues.
TB W2-800SL FR and distoration measurement plots
-Charlie
thats a cool looking project there charlie. I have 6 of the 800SL sat here, and various woofers i could use, and i bought them with the purpose of using these in a low 500hz to 1khz crossed two way.
- Status
- Not open for further replies.