Is there any CNC shop that can sell and cut 4x8 Baltic birch or some plywood to make some sub cabinets ? , i am not good at all to work with wood
i can assemble and glue the cut panels but not cut them by myself
and i was thinking that if the shop that will cut the wood will also sell the wood
to me will be better as i dont need to buy my local wood, ship to them, they cut and then ship back to me
Any pointers will be appreciated
Max
i can assemble and glue the cut panels but not cut them by myself
and i was thinking that if the shop that will cut the wood will also sell the wood
to me will be better as i dont need to buy my local wood, ship to them, they cut and then ship back to me
Any pointers will be appreciated
Max
Around here there are many custom kitchen cabinet shops. They normally work with 12mm plywood but can order thicker. I would check with one of them.
- Status
- Not open for further replies.