DIY Kit Horn for sales.
Can support JBL , TAD.
Anyone interest of it, please send me a post
Can support JBL , TAD.
Anyone interest of it, please send me a post
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
horn with cabinet | Flickr - Photo Sharing!
HF Horn | Flickr - Photo Sharing!
DIY Horn Kit for sales
It is USD 350 for upper horn per pair
If you want Upper Horn with 15" base two way cabinet, it is around USD 500, excluding shipping cost. I can tailor made the cabinet, all made by plywood.
If you want Upper Horn with 15" base two way cabinet, it is around USD 500, excluding shipping cost. I can tailor made the cabinet, all made by plywood.
Horn with cabinet (A) | Flickr - Photo Sharing!
Horn (A) style
2 ways horn cabinet | Flickr - Photo Sharing!
Horn (B) Style
horn 15 cabinet (B) | Flickr - Photo Sharing!
Horn (C) Style
Horn (A) style
2 ways horn cabinet | Flickr - Photo Sharing!
Horn (B) Style
horn 15 cabinet (B) | Flickr - Photo Sharing!
Horn (C) Style
Hi could you provide sizes, volume, recommended drivers for the last cabinet please + price. Thanks
Horn A size
65x48x80 cm
Horn B size
35.5 x 21.5 x 14.5 cm, the Woofer unit is 15" can tailor made
Horn C size
65x48x90 cm
65x48x80 cm
Horn B size
35.5 x 21.5 x 14.5 cm, the Woofer unit is 15" can tailor made
Horn C size
65x48x90 cm
What is the horn type ?
Cut off freq?
1"-2" driver ?
You must tell more if you want people to buy your stuff.
mats
Cut off freq?
1"-2" driver ?
You must tell more if you want people to buy your stuff.
mats
Horn month can open 29MM or 35MM or 44MM
It is flat Horn , the outer horn width is 35.5 * 21.5 cm
Normally use 1" driver,
Different horn model have different cut off freq, JBL, TAD, Altec,..... etc, please refer to your horn parameter.
It is flat Horn , the outer horn width is 35.5 * 21.5 cm
Normally use 1" driver,
Different horn model have different cut off freq, JBL, TAD, Altec,..... etc, please refer to your horn parameter.
Hi Joelau - you need to explain what sort of horn you are building, eg the expansion type (exponential, tractrix, etc.), the flare rate, etc. As for the cabinets, please can you say what the internal volume is and what the tuning frequency is and for which driver you designed it for. Otherwise, do you build cabinets to order? I live in HK and need some new cabinets of 3.2 cubic feet internal volume.
Thank SMF.
Sorry, I misunderstanding your meaning ,MATSJ.
It is a tractrix Horn which we are using TAD 2402 as blueprint clone the cabinet.
dimensions: 65*48*80CM. Also I can provide tailor made cabinet.
Sorry, I misunderstanding your meaning ,MATSJ.
It is a tractrix Horn which we are using TAD 2402 as blueprint clone the cabinet.
dimensions: 65*48*80CM. Also I can provide tailor made cabinet.
- Status
- Not open for further replies.