wiring

[BlueWizard]

Here is a sketch of the wiring possibilities -

 

[trai1824]

thank you so much for your help.
one last question....so if later i use 2 cabs that are 8ohms, i can use them together with my amp safely? im guessing that =4ohms together...😎
and so could i use the other out jack on the back of head for other cab later?

 

[BlueWizard]

That's right. 8/2 = 4 ohms

To understand combining speakers together, look at these two posts -

On the Nature of Impedance - Post #1
http://www.avforums.com/forums/showthread.php?t=543347

and roughly the same thing at -

In Need of Lesson in Speaker Impedance - Post #61
http://www.audiokarma.org/forums/showthread.php?t=52557&page=5

That should help.

Steve/bluewizard

 

[jnb]

Recently I came across a well known speaker model of a respected brand that was rated at 8 ohms nominal but had a side note that it was possible for the impedance to drop as low as 3.2 ohms.

A trap for young players 😉

 

[trai1824]

thanks again for all your help😀