winding your own coils

[Roger Madison]

Can anyone point me in the right direction to find information on winding your own coils for cross-overs. I've got a table for DIY coils but it's limited and wire sizes are AWG. I'm living in Southern Africa and everything is in millimeters. I find easier to wind my own as living in the African bush there are no Parts Express in the village. I've been told that the CALSOD programme has a down loadable section for making your own coils, but I can't find a web site for it that is open. Any help would be greatly appreciated. thanks

 

[feralear]

http://lalena.com/audio/

has a inductor calculator. Have fun.

 

[jackinnj]

coils

here's another link with some tutorials:
http://www.amidoncorp.com/f_ham.htm
further, if you have a pal in the US, most of this stuff will ship internationally without a problem.

 

[BeanZ]

I would not purchase anything from amidon. It is highway robbery. Try allstar magnetics. However, the amidon info is good.

 

[billbobanderson]

Roger.

I am Bill Anderson. I worked with you in 92/93.

 

[I_Forgot]

"Build a Universal Coil Winding Machine", David J. Gingery, ISBN 1-878087-10-X

I_F