Last month a began conversation with one forum member. After chatting a few times I realized that a friend would have some valuable feedback to share. So, I gave him the link to our conversation, but after two attempts he only gets errors. I always click Yes to allow anyone to join my chats so why can't he join us?
It should be available when you are the conversation starter. Also you can specify that others in the conversation can have this ability.
View attachment 1254800
View attachment 1254800
@Netlist what is requirement to get out of probation time before i can send message to someone. I need help with contacting one of the member . https://www.diyaudio.com/community/threads/re-capping-hca-1206.407357/
You can't contact Netlist directly through this thread but I'll see if I can help.
Your release from probation is done automatically by this platform, and the Moderators are not privy to the exact process.
You have only 3 posts so please continue posting and the forum will decide.
Note: Filler type posts do not count toward your total so please be patient.
This is a necessary evil for obvious reasons.
Thanks for your understanding.
Your release from probation is done automatically by this platform, and the Moderators are not privy to the exact process.
You have only 3 posts so please continue posting and the forum will decide.
Note: Filler type posts do not count toward your total so please be patient.
This is a necessary evil for obvious reasons.
Thanks for your understanding.