I would like to convert existing 3-way loudspeaker boxes (currently with passive crossovers) into an active system. I am looking for 3-channel amplifiers with 3-way active crossovers, all together assembled ready on one single circuit board for each loudspeaker box and ready for connection. (power AC or DC; input; 3x output to speakers; nothing else). It is sufficient if the three amplifiers for one box together produce around 70 watts @ 4 ohm. It does not have to be "high end".
I have not found anything suitable online so far, only 2.1, 5.1 amps etc., plate amps only as 2-way, perhaps I am not using the right keywords.
Can anyone give me a hint, perhaps links to corresponding offers?
I have not found anything suitable online so far, only 2.1, 5.1 amps etc., plate amps only as 2-way, perhaps I am not using the right keywords.
Can anyone give me a hint, perhaps links to corresponding offers?
It's a plate amp but you can install it in a box: 3x75W (8Ohm) with dsp. You'll need two of this.
https://www.hypex.nl/products/amplifier-families/fusion-amplifier-family/fusionamp-fa123
https://www.hypex.nl/products/amplifier-families/fusion-amplifier-family/fusionamp-fa123
https://www.diyaudio.com/community/threads/board-3-waydsp-amp.415079/It is sufficient if the three amplifiers for one box together produce around 70 watts @ 4 ohm.
https://www.diyaudio.com/community/threads/3-way-dsp-amp.415065/#post-7734938
Note this solution. If you don't need 100W per channel at 32V, I can convert it to 50W per channel at 24V. At 24V it only consumes 6W.