what type of resistor/capacitor to use in the Zobel network? (LM3886 schematic inside)

For the capacitor, I have both 0.1uF in ceramic and polypro. Can I use either of them? If yes, which one is preferrable?

Thanks in advance.

Screenshot from 2024-09-17 11-17-21.png
 
If the amp is ever tested at full power, or bursts into HF oscillation, I'd want a low loss film capacitor
there, a foil type if possible. If it's also X or Y is not so important. PP is better than polyester types.
But size it for several watts at least.

For the RL, use a low inductance 10W resistor. Sometimes the L is wound right on the R.
 
  • Like
Reactions: mrjayviper