What if I screwed up a speaker when I connect the amp? What do I do? I find out the bigger speaker ( mostly two speakers on the bookstxxx speaker, small for high and big for bass) of my AWIA SC-51 didnt respone. Cuz my carefulless.
Addiction how to test the DC offset if I only have two 51ohm resistor?
btw I used two 51ohm got a 15.xx mV DC offset.
Addiction how to test the DC offset if I only have two 51ohm resistor?
btw I used two 51ohm got a 15.xx mV DC offset.
S.C said:
Addiction how to test the DC offset if I only have two 51ohm resistor?
btw I used two 51ohm got a 15.xx mV DC offset.
So how do you know you have 15.xx mV DC offset?
Nuuk said:S.C always use an old speaker to test any new amp, or amp modification. Then if you value your loudspeakers, use some sort of speaker protection at least for the first few weeks.
Hey Nuuk, an old speaker was what he used.
Oh... 1.2 Ohms! Seams like an Apogee.
S.C., forget those speakers, they're too crappy, they don't worth repairing.
Buy a new pair of speakers, there are some cheap models out there that are not bad at all.
Hey Nuuk, an old speaker was what he used.
Hi Carlos. I meant use something really awful like B&W 600 series.
Nuuk said:
Hi Carlos. I meant use something really awful like B&W 600 series.
Thx for the advise...... bad luck anyway......... B&W 600??? any link for me to se how "cheap" they are
how about buying a smilar drive to put on the empty hole? Will it sound good and work? Like ....http://retro.co.za/audio/system.html
how about buying a smilar drive to put on the empty hole? Will it sound good and work? Like ....http://retro.co.za/audio/system.html
B&W 600??? any link for me to se how "cheap" they are
Hi S.C. - I was just having a joke with Carlos who uses those speakers.
You can't just put any old driver in the hole to replace a damage unit. The two drivers (for each channel) need to be an exact match.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- What if I screw up a speaker?