it is not going to be difficult to put additional windings on the torroid traffo to accomodate the aikido....
SAV-400A Tested results are great for this single ended tube amp
Great amplifier for the price, I’m quite taken back really…
Looks to be a single ended design can’t see any transistors or Mosfets inside it is of exceptional build quality for the price and it sounds great too, I’d say it’s more 30-35 watts the bass and treble control are digital apart from that it’s a tube amp alright.
Has anyone actually tested one of these or are you all just got nothing better to do but speculate on what’s inside? If you are to be reviewing here actually buy and open the devices first rather than post misleading speculative banter about what you think it is.
Cake


Looks to be a single ended design can’t see any transistors or Mosfets inside it is of exceptional build quality for the price and it sounds great too, I’d say it’s more 30-35 watts the bass and treble control are digital apart from that it’s a tube amp alright.
Has anyone actually tested one of these or are you all just got nothing better to do but speculate on what’s inside? If you are to be reviewing here actually buy and open the devices first rather than post misleading speculative banter about what you think it is.


hammerhouse, do you have one of these?
it would be most helpful if you posted some pics of the unit you got.
it would be most helpful if you posted some pics of the unit you got.
Straight from the auction listing:
Awesome! Where can I get one? 🙂 Since when has 2x45W class A - excuse me - PURE class A been equal to 200W RMS.
A lot of people love to bash the eBay auction listings here. And in my opinion for a very valid reason. All you have to do is to read the auction listing and pick it apart to realize that it's bogus. That they claim their amp defies the laws of physics is definitely a red flag... It's just amazing what these sellers get away with.
~Tom
Output Power: The SAV-400A delivers 2 X 45 Watts in a Pure Class A Operation (eq to 200W RMS) when 2 speakers are connected
Awesome! Where can I get one? 🙂 Since when has 2x45W class A - excuse me - PURE class A been equal to 200W RMS.
A lot of people love to bash the eBay auction listings here. And in my opinion for a very valid reason. All you have to do is to read the auction listing and pick it apart to realize that it's bogus. That they claim their amp defies the laws of physics is definitely a red flag... It's just amazing what these sellers get away with.
~Tom
Has anyone actually tested one of these or are you all just got nothing better to do but speculate on what’s inside? If you are to be reviewing here actually buy and open the devices first rather than post misleading speculative banter about what you think it is.
i have actually, i have gotten rid of the 2 tube rectifiers:


pics of the insides my unit:




modding the power amp board:

modding the input board to get rid of the 2 tube rectifiers:



scheme for the sub-woofer out:

SAV-400A @ £69.99
Hi 🙂
The SAV-400A is a Hybrid – Listings have been updated please note this is an entry level amp at a mere £69.99 a great buy we think. These are discontinued hence the great offer price.
Grab one! these are great for re working if you thinking of tweaking…
Hi 🙂
The SAV-400A is a Hybrid – Listings have been updated please note this is an entry level amp at a mere £69.99 a great buy we think. These are discontinued hence the great offer price.
Grab one! these are great for re working if you thinking of tweaking…

Just had a look at one of these today. Chip-amp without a doubt.
1875 is nice sounding chip amp. apart from that nothing else special.
Definitely not a "tube amp" as claimed.
1875 is nice sounding chip amp. apart from that nothing else special.
Definitely not a "tube amp" as claimed.
the SAV-400 sells as Sakua-200 in the Philippines.....i have analysed the circuit and the 2 rectifier tubes are used to supply +/-6 volts rails to a 4558 op-amp driving the tone control stack
So, do the tube rectifiers impart any tube sound to the audio, like tube rectifiers are supposed to be superior to solid state rectifiers in a tube amp? 😀
So, do the tube rectifiers impart any tube sound to the audio, like tube rectifiers are supposed to be superior to solid state rectifiers in a tube amp? 😀
no.......
AV-400
I bought AV-400 last week.1st thing it look very nice.As the weight was too less, I open it to look for the impedance matcher and power feeder guys.A small torroid sitting in the wooden cage behind the valves with 24v-0-24v and 0-7 v tappings.No other transformers.The valve numbers were not very clear.but I managed to read.It was 6n1 and 5z4p.The big job was done by solid state people.luckly no Ic they are transistors mounted on heat zink.They got their own bridge rectifieron board.The big Valves(rectifier) seems like to drag the attention.The small valves were doing somthing as I removed them from the circuit results stopping that channel (Probably pre amplifier).I was not interested to trace the circuit to see what they are doing.The sound was ok with high efficiency spreaker.
Thanks
I bought AV-400 last week.1st thing it look very nice.As the weight was too less, I open it to look for the impedance matcher and power feeder guys.A small torroid sitting in the wooden cage behind the valves with 24v-0-24v and 0-7 v tappings.No other transformers.The valve numbers were not very clear.but I managed to read.It was 6n1 and 5z4p.The big job was done by solid state people.luckly no Ic they are transistors mounted on heat zink.They got their own bridge rectifieron board.The big Valves(rectifier) seems like to drag the attention.The small valves were doing somthing as I removed them from the circuit results stopping that channel (Probably pre amplifier).I was not interested to trace the circuit to see what they are doing.The sound was ok with high efficiency spreaker.
Thanks
Reviving an old thread! I picked up a non working version of this tube-hybrid amp for USD $25(SGD $35). This one is much bigger than AV400. And got 6tubes instead of 4 on AV-400. I picked it up for the chassis. Thought I would plonk a T-amp in their with some modified tube stage. To my surprise this thing weighs 10Kg. I expected even lighter and I thought it would be smaller too...
https://es.aliexpress.com/store/product/Dantex-H-08-High-Performance-HiFi-Electronic-Vaccum-Tube-Amplifier-RMS-home-theater/1210765_32711843648.html
I haven't opened it yet. I dont even know which are these tubes... But will be a fun project for $30 I guess.
https://es.aliexpress.com/store/product/Dantex-H-08-High-Performance-HiFi-Electronic-Vaccum-Tube-Amplifier-RMS-home-theater/1210765_32711843648.html
I haven't opened it yet. I dont even know which are these tubes... But will be a fun project for $30 I guess.
Last edited:
I found some more info.
The tubes used are
6J8P 6N5 5Z4P
And it has two big torroid transformers... Wow that already gives me back my $25.
??AV-08 hifi ?? ??? ?? ?? ?? ?????????
The tubes used are
6J8P 6N5 5Z4P
And it has two big torroid transformers... Wow that already gives me back my $25.
??AV-08 hifi ?? ??? ?? ?? ?? ?????????
I found some more info.
The tubes used are
6J8P 6N5 5Z4P
And it has two big torroid transformers... Wow that already gives me back my $25.
??AV-08 hifi ?? ??? ?? ?? ?? ?????????
Actually the tubes are
6N5PJ, 6J8P and 5Z4P
- Status
- Not open for further replies.
- Home
- Amplifiers
- Tubes / Valves
- What do you think of this cheap tube amplifier?