What are these toggle caps called

[jsantoro]

They are used on test instruments and I can't find them anywhere.

 

[benb]

Do you mean toggle SWITCH caps?
These things?
https://www.firgellirobots.com/products/silicon-rubber-waterproof-toggle-switch-cap-inner-dia-12mm

 

[jsantoro]

Sorry, forgot got to include the pic. These, they go on flat bladed switches.

 

[rayma]

A boot, to make the switch water resistant.

 

[NareshBrd]

They go on the back over the wires, or as caps on the actuator?

Get some PVC tubing, cut and heat in place with a heat gun or hair dryer for the tops

Blood and urine bags are commonly made in PVC.
It is a cheap item, difficult and expensive to obtain as a separate part, usually sold with switch.

The small covers that go on top of lugs in car wiring can be used to cover the wires on the back of the switch, those are easily available at electrical parts shops.

 

[jsantoro]

Cap on an function switch lit this. As in the top of the picture. You can see the missing one towards the bottom. It's not a big deal I just got curious and started looking for one.

 

[NareshBrd]

Heat shrink tubing is sold in many colors and sizes.
Just pinch the ends with a tweezer / forceps to close up while fixing.

 

[theAnonymous1]

Try searching for "selector blade switch cap".

 

[jsantoro]

Thanks, I had forgotten about guitar selector caps.

 

[techtool]

They are similar to the knobs used on some slide pots. Might try searching for those.
https://www.digikey.com/en/products.../4219/10230007?s=N4IgTCBcDaINYDsD2AjAziAugXyA

 

[jsantoro]

Thanks, they are. I found these also.
https://www.digikey.com/en/products/detail/nkk-switches/AT467A/1050415