Here are the technical specs;
Dual 4
Revc = 7.2 Ohm
Fo = 20.5 Hz
Sd = 840.0 cm^2
Vas = 260 Ltr
Mms = 224 g
BL = 22.31 T.M
Qms = 2.76
Qes = 0.42
Qts = 0.368
No = 0.54%
SPLo = 89.34 dB
i am looking for sealed and ported box suggestions and port dia and length.
thank you for your time.
Dual 4
Revc = 7.2 Ohm
Fo = 20.5 Hz
Sd = 840.0 cm^2
Vas = 260 Ltr
Mms = 224 g
BL = 22.31 T.M
Qms = 2.76
Qes = 0.42
Qts = 0.368
No = 0.54%
SPLo = 89.34 dB
i am looking for sealed and ported box suggestions and port dia and length.
thank you for your time.
thank you.
here is the topic from another forum.
http://forum.elitecaraudio.com/showthread.php?threadid=140263
here is the topic from another forum.
http://forum.elitecaraudio.com/showthread.php?threadid=140263
OK so we'll make it as high as a common end table whatever that means, and 3 feet wide and deep?
Try and think about what you are asking instead of rushing your replies and simply posting links to other forums. We're not here to spoon feed you, you have to make some effort yourself.
Try and think about what you are asking instead of rushing your replies and simply posting links to other forums. We're not here to spoon feed you, you have to make some effort yourself.
the company that builds these is very reputable and will state specs accurately. the driver was intended for a car audio install. i wanted to use it in a home set up is all.
i may build this type of box as the parts are easy to attain.
http://www.subwoofer-builder.com/sonosub.htm
i may build this type of box as the parts are easy to attain.
http://www.subwoofer-builder.com/sonosub.htm
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- what are some sealed and ported box sizes you can suggest for this speaker ?