weird black

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi guys,

ok my pj looks very fine. Focus and brightness corner to corner and very good contrast. But remains a problem: in lower part of projected image, so the upper part inside the pj, the black is too "contrasted" as you would see if you were on wrong viewing angle, but upper image is good. I've tried to change a lot of position and inclinations: lcd, fresnel, optics... nothing. Same problem remains. Only messing with software settings about colour, contrast and brightness I'm able to reduce the effect, but the upper image is good and messing with those setting I decrease picture beautiful contrast... :xeye:

Could be that part of the lcd kinda damage? I dont understand why upper image is good.

Anyone has ever seen this problem with blacks?

thanks for any help!

ps. ASAP I'll post the hole project with photos :cool:
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.