Any more info on the custom drivers and crossovers? I'm on the list for the OS 12. Would I just use the same drivers as Geddes? What's exit angle and CD mounting system? I'd like the get the CD with the highest freq. extension. What's the best woofer option?
Thanks,
Roy
Beyma cp385nd + AE Speakers TD12M would be the best CD/woofer combo based on measured performance. Brandon/Augerpro over on HTguide.com would have XO information for that combo but the Vertical CTC might be difference on his box design because he used the QSC HPR152i waveguide to build the XO.
Thanks Doug,
I went to HTguide.com and tried to register to no avail. Hmmm.... perhaps I need to use a local ISP address? yahoo.com doesn't seem to work. I've had no luck with Audiokarma too.
-Roy
I went to HTguide.com and tried to register to no avail. Hmmm.... perhaps I need to use a local ISP address? yahoo.com doesn't seem to work. I've had no luck with Audiokarma too.
-Roy
Unfortunately Brandon is using the QSC HPR152i WG so I suspect my situation will be different with the 12"OSWG.
Last edited:
That looks interesting! Looks like you don't need a large waveguide. Just set it on top of the woofer box and connect with a crossover. Of course, I'm still mostly ignorant of speaker/driver design. I got into this quickly and have to study much more to get up to speed.
Would I better off with this or the 12" OSWG? Dipole too?😕 Hmmm...
It seems that this would be very easy to implement.
-Roy
hello hello cmon guys use you great audio intelligence and come up with somthing for a dumber audio lover like myself to buy. My money is good. Personally I would love to buy a mold too. I have cf wrap here. Is there a new thread somwhere?
Autotech at Hi-End Praha 2011. JMLC-350 has green pattern made of special UV cured varnish. Source:
High End Praha 2011 - AVmania.cz
High End Praha 2011 - AVmania.cz
Attachments
I would love to purchase a mid bass horn for cone driver to go under my iwata 300, anything planned ?
someting like this would be awesome
The Audio Eagle - The Making of GOTO Horn Speakers a la Haigner
Anthony
someting like this would be awesome
The Audio Eagle - The Making of GOTO Horn Speakers a la Haigner
Anthony
here is my project of midbass horn, combined hedlund and labhorn idea with over 3,5 m long horn, should go down to 40Hz and what's more important to me will cover 40Hz up to 400 Hz, where JMLC 200 with BMS 4590 will take over. Thank you Jacek Zagaja for inspiration and meritorical help. The horn is curently in production (carpentery) in 2 weeks time should have some pictures and measurements
Attachments
Last edited:
Driver for Iwata 300
Hello Anthony,
What driver are you using with the Iwata 300 horn? I have some Altec 291-16B. Would they work? If not what driver specifications should I be looking for when choosing a driver for this horn? Any help would be appreciated.
Regards,
David
http://www.altecpro.com/pdfs/vintage/SpeakerAndMics/drivers/291-16B HF Driver.pdf
Hello Anthony,
What driver are you using with the Iwata 300 horn? I have some Altec 291-16B. Would they work? If not what driver specifications should I be looking for when choosing a driver for this horn? Any help would be appreciated.
Regards,
David
http://www.altecpro.com/pdfs/vintage/SpeakerAndMics/drivers/291-16B HF Driver.pdf
hello,
I'm using tad 4001, but no doubt that the altec will work.
From data sheet maybe a tweeter will be needed ?
Regards
Anthony
I'm using tad 4001, but no doubt that the altec will work.
From data sheet maybe a tweeter will be needed ?
Regards
Anthony
jaskierster is lovely horn. Have you got a thread for it to follow? I take it I long missed out on the mid horns? I still don't get how you build such big horn strong enough not to resonate.
resonance can be a prolem, this will be a prototype, soon I will start a new thread with my horn - story
Incredible looking speakers. I hope everyone liked them at the event.
The finish on them looks great and I can't wait to see the waveguides in person.