Waveguide Tweeter mounting complete

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Drop in baffle hole waveguide tweeter mount. Oatly epoxy comes in a roll, mix and apply. Did a test with a nail mounted to the cut off portin of waveguide and bent the 16p nail with plyers and had to try VERY hard to get it to seperate.
Just thought this may work for people making non removable baffle cabinets.
 

Attachments

  • img_0077_1 copy.jpg
    img_0077_1 copy.jpg
    38.5 KB · Views: 493
Good recommendation. I made a wall around the back of my waveguide and poured epoxy until it reached the appropriate level. The epoxy I used was sufficiently rigid to mount the tweeter directly using course screws. Your method does not rely on obtaining large quantities of epoxy and is more approachable.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.