Wanted: schematics for Quicksilver MS-190 / MX-190

[marknoir]

Restoring these rwo amps. Looking for schematics. Thanks.

 

[Burnedfingers]

Someone was looking on Audiogon in 2017 for a schematic. About the only way you might get one is to call Mike Sanders at Quicksilver or better yet simply hand draw your own. Don't expect Mike to give it to you...my opinion here.

 

[marknoir]

Thank you

 

[SiCo Amps]

Thank you

If you happen to see this message after all these years, would you please let me know if you were able to draw (or find) a schematic for the MS-190 (or MX-190)? If so, could you please share? Thanks

 

[Palustris]

Years ago I asked Mike for a schematic. He told me to draw my own; so I did.

 

[SiCo Amps]

That sounds like Mike. In the event that you still have your drawing, are you able to share what you drew?

 

[Palustris]

It was a different amp: PP KT88

 

[SiCo Amps]

I owned a pair of Quicksilver KT88 mono blocks from 1988 to 1994. The MS-190 is a different animal. I have completed drawing the "triode" front end. Just need to knock out the power supply.