Hi,
Im planning to use the 300 rpm motor kit for VPI scoutmaster TTs in a DIY project. Problem is that I dont know much about motors and found that this one has one capacitor and 4 cables that comes out of it. Can I just wire everything (if yes, how?) and connect it to the wall or I need more hardware to make it work?, thanks in advance
![hw-scoutm[1].jpg](https://www.diyaudio.com/community/data/attachments/229/229310-bb9ad577eedb7e42881646a0be3aced3.jpg?hash=u5rVd-7bfk "hw-scoutm[1].jpg")
Im planning to use the 300 rpm motor kit for VPI scoutmaster TTs in a DIY project. Problem is that I dont know much about motors and found that this one has one capacitor and 4 cables that comes out of it. Can I just wire everything (if yes, how?) and connect it to the wall or I need more hardware to make it work?, thanks in advance
Connect the two blue wires together and attach to AC neutral; wire the cap in parallel across the red and black wires (cap is non-polarized and can be oriented either way) and apply AC hot to the red wire for clockwise rotation or to the black wire for counterclockwise rotation.
- Status
- Not open for further replies.