Hi Guys
I have a pair of Visaton B200's currently in need of use, could someone recommend a cabinet, I would prefer not to go down the OB path as I would most likely be torn apart by my other half.
Plans I have seen include:
Solo 100
Solo 50
BD-Design - DIY Singular
Strassacker: Speaker - kits - do it yourself
http://www.diyaudio.com/forums/full-range/98180-visaton-b200-bookshelf.html
Any suggestions on which way to go?
Ryan
I have a pair of Visaton B200's currently in need of use, could someone recommend a cabinet, I would prefer not to go down the OB path as I would most likely be torn apart by my other half.
Plans I have seen include:
Solo 100
Solo 50
BD-Design - DIY Singular
Strassacker: Speaker - kits - do it yourself
http://www.diyaudio.com/forums/full-range/98180-visaton-b200-bookshelf.html
Any suggestions on which way to go?
Ryan
Joe Rasmussen has an aperiodic TL that flattens the impedance to the point where you can use current drive -- thats what i'd go for.
I couldn't find it the last time i searched... you might need to write him.
dave
I couldn't find it the last time i searched... you might need to write him.
dave
Yes, that's the one. With phase plugs the B200 doesn't really need tweeters... before we did that it was one of the 1st things we thot about adding.
dave
dave
Ha I actually bought the b200's off Joe years back, I checked his website just before and he has removed the crossover schematic. The removal of the ferro fluid in the tweeter looks a bit daunting too.
Might give him a call tomorrow.
Might give him a call tomorrow.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Full Range
- Visaton B200