Visaton B200 with AMT?

[Raj1]

Hi Dave,

I've been running the Visaton. B200s you modded for me, in open baffles for a number of years now. The one area I'd like to augment if possible is the HF. I'm wondering if you have any thoughts about suitable AMTs to partner the B200s?

-Raja

 

[Freedom666]

Leave on axis response linear.

And put side firing tweeters, here info on that

https://www.diyaudio.com/community/...ull-range-phase-coherency.403430/post-7457552

 

[planet10]

Hard to get anyy tweete to work seemlessly with it IME. You can only try and see. XO will be critical.

dave

 

[Raj1]

Thanks, Dave. I see. Any other combo you can recommend for an AMT with ample sensitivity for 300B SET amps? ESS Heil combo would be nice. I have 4 subwoofers I can cross in at 200 Hz, so was looking for some fill between there and the AMT.

 

[planet10]

Ideally you want something that has a dispersion simialr to the top of the B200 where you XO it… usually some sort of horn. I may even have some cheap ones i could ship you.

Or, given it is an OB, you might have better luck placing a rear firing tweeter.

dave

 

[Raj1]

Hi Dave,

Tried emailing you, but it may have bounced. Please let me know what the best way to make contact is.

-Raja