I am in need, well not exactly me, but my colleague wants to purchase a cutter to cut acrylic without heating it (acrylic)considerably. The water and other coolants cannot be used as it contaminates the sample (sediment in this case).
The unit should be hand-held and powered by mains, 50Hz.
Does anybody know of such a product.
Thanks in advance.
Gajanan Phadte
The unit should be hand-held and powered by mains, 50Hz.
Does anybody know of such a product.
Thanks in advance.
Gajanan Phadte
Looks like I was not clear enough...
The acrylic tube, in which the sample is collected needs to be cut, along the length, without disturbing the sample, physically and chemically and by keeping the sample on a worktable. The sample cannot be moved from the table after opening up, as it gets disturbed.
Help please.
Gajanan Phadte
The acrylic tube, in which the sample is collected needs to be cut, along the length, without disturbing the sample, physically and chemically and by keeping the sample on a worktable. The sample cannot be moved from the table after opening up, as it gets disturbed.
Help please.
Gajanan Phadte
I've seen these used in cutting open plastic enclosures without melting the plastic. Leaves a nice clean cut as wide as the blade.
http://www.sonotec.com/ecutter.htm
http://www.sonotec.com/ecutter.htm
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- Vibrating cutter...any available