I'm a newbie to winisd but I was messing with a box for the TB sub up on the PE home page and for a vented box it wanted a vent length of 11 feet. Whats up with this?
Small enclosure size + large vent area + low tuning frequency = stupidly long port.
It's one of the things you have to compromise on when you design any enclosure.
It's one of the things you have to compromise on when you design any enclosure.
Yes, large enclosure will shorten the vent alot. If you use a smaller port area, for example a 2" diameter instead of a 4" diameter, it will shorten the vent alot too.
You can also use a passive radiator in a small box, then you bypass all those stupid problems for a small box that you want to go vented instead of sealed. No vent noises either.
You can also use a passive radiator in a small box, then you bypass all those stupid problems for a small box that you want to go vented instead of sealed. No vent noises either.
- Status
- Not open for further replies.