Any one have schematics or service manual for Velodyne SPL series II?
There is a bridge rectifier on the "motherboard" that has an effective short across the ac in's. Removed bridge and short remains.
There is a bridge rectifier on the "motherboard" that has an effective short across the ac in's. Removed bridge and short remains.
I know this thread is old , but we need more info on these Velodyne amps. I need the SPL12RBGE scematics. @ gptec You maybe measuring your transformer.
It's no surprise on these amps that eventually they give out because the PCB,s are exposed to the worst possible vibration possible in audio.
They never seal the amp from the woofer environment but share the same air space, and the amps don't need air movement for cooling.
I have 2 mini 8's that need service.
Looking carefully at the boards you can see nothing burned at all.
Someone out there has a ballpark idea what gives out on these consistently?
So yes a schematic would help.
They never seal the amp from the woofer environment but share the same air space, and the amps don't need air movement for cooling.
I have 2 mini 8's that need service.
Looking carefully at the boards you can see nothing burned at all.
Someone out there has a ballpark idea what gives out on these consistently?
So yes a schematic would help.
- Status
- Not open for further replies.