Fre items that ill include with every purchase listed in the following posts. for my feedback on ebay, reddit, audiokarma and audiocircle message me but if you are not ok with fnf dont message me.
1 - Integrated amplifier DIY project (AC line filter + Soekris R2R DAC with its own lienar power supply + volume control in digital domain + TI 3255EVM with its own switching power supply)
all in one box $299 for everything in the pics + $34 shipping conus (you will not beleive the weight) total $333 with zelle or paypal fnf or venmo. there will be no guarantees for anything sold for parts.
The red signal wires are neotech super expensive wire. I built this some years ago and tested everything except the line filter. so I know its all good but i am selling for a fraction of the cost of the parts so there will be no guarantee or after sales service. I'll try my best to secure everything for shipping but there will be no expressed or implied guarantee. The super binding posts are also very nice. i was very impressed by them. The holes in the back plate are all hand drilled and messy. not pretty. The gauges in the front work beautifully. this is a video of an earlier version before I added the DAC but it shows the gauges
2 - CROWN 1502 barely used $275 with CONUS shipping on me fnf
3 - this stuff all together $100 + $30 shipping conus (super heavy) = $118 fnf
that's the DIYaudio power supply built with the most expensive parts and tested.
i wont list the rest. just look at pictures.
4 - akitika phono pre amp. here is info: https://www.akitika.com/PhonoPreamp.html
built with highest level of care. all wires and components are fancy. here are pictures and proof of ownership: price: $199 shipped fnf
1 - Integrated amplifier DIY project (AC line filter + Soekris R2R DAC with its own lienar power supply + volume control in digital domain + TI 3255EVM with its own switching power supply)
all in one box $299 for everything in the pics + $34 shipping conus (you will not beleive the weight) total $333 with zelle or paypal fnf or venmo. there will be no guarantees for anything sold for parts.
The red signal wires are neotech super expensive wire. I built this some years ago and tested everything except the line filter. so I know its all good but i am selling for a fraction of the cost of the parts so there will be no guarantee or after sales service. I'll try my best to secure everything for shipping but there will be no expressed or implied guarantee. The super binding posts are also very nice. i was very impressed by them. The holes in the back plate are all hand drilled and messy. not pretty. The gauges in the front work beautifully. this is a video of an earlier version before I added the DAC but it shows the gauges
2 - CROWN 1502 barely used $275 with CONUS shipping on me fnf
i wont list the rest. just look at pictures.
4 - akitika phono pre amp. here is info: https://www.akitika.com/PhonoPreamp.html
built with highest level of care. all wires and components are fancy. here are pictures and proof of ownership: price: $199 shipped fnf
Last edited by a moderator:
These are all free with any purchase (well not all of them for one purchase. ill try to spread them to incentivize the sale of all items listed above and below)
some of the items:
1 - 4x bob Cordell's LM3886
2 - silas sslv 1.3 pcb
3 - hifi capacitors and diodes ad transistors
4 - raspberry pi 3
5 - alu heatsinks
6 - 2x 100 watt 8 ohm resistors used in crossover testing and design
some of the items:
1 - 4x bob Cordell's LM3886
2 - silas sslv 1.3 pcb
3 - hifi capacitors and diodes ad transistors
4 - raspberry pi 3
5 - alu heatsinks
6 - 2x 100 watt 8 ohm resistors used in crossover testing and design
akitika phono pre amp. here is info: https://www.akitika.com/PhonoPreamp.html
built with highest level of care. all wires and components are fancy
here are pictures and proof of ownership:
price: $200 + $22 shipping = $222 fnf
built with highest level of care. all wires and components are fancy
here are pictures and proof of ownership:
price: $200 + $22 shipping = $222 fnf
these are also free:
the last picture are the feet from my SOTA turntable that i sold years ago. i dont know how i sold it without them. the tubes are many and i know nothing about their quality or quantity. i dont remember and i dont care.
the last picture are the feet from my SOTA turntable that i sold years ago. i dont know how i sold it without them. the tubes are many and i know nothing about their quality or quantity. i dont remember and i dont care.
I think I also have a transparent acrylic top lid for the phono stage that I had laser cut. i will include it also for free.
PM Sentthese are also free:
the last picture are the feet from my SOTA turntable that i sold years ago. i dont know how i sold it without them. the tubes are many and i know nothing about their quality or quantity. i dont remember and i dont care.
PM sentThese are all free with any purchase (well not all of them for one purchase. ill try to spread them to incentivize the sale of all items listed above and below)
some of the items:
1 - 4x bob Cordell's LM3886
2 - silas sslv 1.3 pcb
3 - hifi capacitors and diodes ad transistors
4 - raspberry pi 3
5 - alu heatsinks
6 - 2x 100 watt 8 ohm resistors used in crossover testing and design
PM sent3 - this stuff all together $100 + $30 shipping conus (super heavy) fnf thats the DIYaudio power supply built with the most expensive parts and tested.
i wont list the rest. just look at pictures.
FREE with a purchase.
this is a bottlehead upgrade for the headphone amplifiers. i sold it years ago i am not sure which one but i think it was S.E.X
this is a bottlehead upgrade for the headphone amplifiers. i sold it years ago i am not sure which one but i think it was S.E.X
Money sent to correct email address. I got my money back from the prior transfer to the incorrect email address. Thanks