Unboxing Sienwiny YS-T50L CS8673

Member
Joined 2008
Paid Member
Unboxing / unpacking Sienwiny YS-T50L mini Bluetooth amplifier with close up Fotos of the board.

IMG_20240524_202501.jpg
 

Attachments

  • IMG_20240524_203743.jpg
    IMG_20240524_203743.jpg
    327.8 KB · Views: 136
  • IMG_20240524_202539.jpg
    IMG_20240524_202539.jpg
    392.4 KB · Views: 128
  • IMG_20240524_202405.jpg
    IMG_20240524_202405.jpg
    630.6 KB · Views: 134
  • IMG_20240524_202357.jpg
    IMG_20240524_202357.jpg
    537.9 KB · Views: 141
It has, different than ZK MT502 a volume rotary knob which only gives impulses and amp is turned on by pushing volume knob

IMG_20240524_202351.jpg
 

Attachments

  • IMG_20240524_202342.jpg
    IMG_20240524_202342.jpg
    571.5 KB · Views: 77
  • IMG_20240524_202338.jpg
    IMG_20240524_202338.jpg
    594.2 KB · Views: 67
  • IMG_20240524_202333.jpg
    IMG_20240524_202333.jpg
    601.3 KB · Views: 72
  • IMG_20240524_202323.jpg
    IMG_20240524_202323.jpg
    668.3 KB · Views: 77
  • IMG_20240524_202220.jpg
    IMG_20240524_202220.jpg
    467 KB · Views: 97
  • IMG_20240524_202254.jpg
    IMG_20240524_202254.jpg
    576.7 KB · Views: 79
The cooling for the chipstar cs8673 is managed with a heat conducting self adhesive pad.

I fixed it with glue and a piece of cardboard so that it does not fall off.

IMG_20240525_094020.jpg
 

Attachments

  • IMG_20240525_094008.jpg
    IMG_20240525_094008.jpg
    361.4 KB · Views: 67
  • IMG_20240525_093939.jpg
    IMG_20240525_093939.jpg
    412.5 KB · Views: 77
As the self adhesive pad is thick and soft it looks like that extra glueing of the aluminium should be skipped and the upper metal sheet can be fixed with four screws pressing/fixing the cooling aluminium simply by assembling.

IMG_20240525_102554.jpg
IMG_20240525_102612.jpg
 
Last edited: