4 x ESP P09 Linkwitz 2nd/4th order XO boards. Will do stereo 2 way or mono 3-way with a single board. !BARE BOARDS!
£30 for all 4 or £8 each
--------------
2 x ESP P09 Boards. Fully populated and tested, these are working XO's. Configuration is stereo 3-way with LR 4th order electrical and 350hz and 3.1Khz as the crossover frequencies. Features 14 x BB OPA2134 opamps, matched 1% metal film resistors and closely matched 5% BC polyester caps. Driver level matching is via 3 x 24 turn pots.
£20 for the pair
--------------
1 x ESP P71 Linkwitz transform PCB. !BAREBOARD! Ideal for a sub.
£5
--------------
2 x ESP P71 Linkwitz transform PCBs. Fully populated and configured for 20hz -3dB with Seas L22RNX4P in 20ltr enclosure.
£10 for the pair
--------------
2 x ESP P39 Softstart Circuits. For use with high power transformers. !BAREBOARDS!
£10 for the pair
--------------
£30 for all 4 or £8 each
--------------
2 x ESP P09 Boards. Fully populated and tested, these are working XO's. Configuration is stereo 3-way with LR 4th order electrical and 350hz and 3.1Khz as the crossover frequencies. Features 14 x BB OPA2134 opamps, matched 1% metal film resistors and closely matched 5% BC polyester caps. Driver level matching is via 3 x 24 turn pots.
£20 for the pair
--------------
1 x ESP P71 Linkwitz transform PCB. !BAREBOARD! Ideal for a sub.
£5
--------------
2 x ESP P71 Linkwitz transform PCBs. Fully populated and configured for 20hz -3dB with Seas L22RNX4P in 20ltr enclosure.
£10 for the pair
--------------
2 x ESP P39 Softstart Circuits. For use with high power transformers. !BAREBOARDS!
£10 for the pair
--------------
Good point Al.
Softstarts sold to me 😀
I have a load of thermistors lying around here that I use for the inrush limiting. Aren't these suitable for the Krell?
Softstarts sold to me 😀
I have a load of thermistors lying around here that I use for the inrush limiting. Aren't these suitable for the Krell?
Also will only post to the UK and prices exclude postage, which leaves the option of 1st, 2nd epecial delivery upto you. Discount if you take a couple of items too.
ShinOBIWAN said:
Yeh, that's what I'm using on the prototype, and they work fine. Just thought you might want to get fancy!
Just in case you didnt get the email, I'll take the Populated P9's , I'll cover postage and PayPal costs of course.
pinkmouse said:
K, Cheers mate. I'll go with the thermistors cause I'm lazy. Softstart PCB's are back up for sale.
brianuk said:
Brain email me at: zeroex_15@hotmail.com and pass on your details,
- Status
- Not open for further replies.