Hello All ,
I have fair quantities of the following new old stock tubes and sockets
Mullard Cv4003 box anode 12AU7 ECC82 $18 each
Mullard Cv4024 mil-ruggedised 12AT7 ECC81 $13 each
teflon B7a sockets to suit 6C33 6C41 QQVxx $6 each
teflon b8b loctal sockets to suit 3a/167m 7N7 etc $5 each
teflon b7g sockets to suit 6C4 6X4 EL90 $1.50 each
Any interest , drop me a line , thanks
316a
I have fair quantities of the following new old stock tubes and sockets
Mullard Cv4003 box anode 12AU7 ECC82 $18 each
Mullard Cv4024 mil-ruggedised 12AT7 ECC81 $13 each
teflon B7a sockets to suit 6C33 6C41 QQVxx $6 each
teflon b8b loctal sockets to suit 3a/167m 7N7 etc $5 each
teflon b7g sockets to suit 6C4 6X4 EL90 $1.50 each
Any interest , drop me a line , thanks
316a
316a said:
teflon b7g sockets to suit 6C4 6X4 EL90 $1.50 each
316a
Does EL84 fit in b7g? I'm interested in buying eight pieces.
regards,
DJG
Reminder
Mullard Cv4003 box anode 12AU7 ECC82 $18 each
Mullard Cv4024 mil-ruggedised 12AT7 ECC81 $13 each
teflon B7a sockets to suit 6C33 6C41 QQVxx $6 each
teflon b8b loctal sockets to suit 3a/167m 7N7 etc $5 each
teflon b7g sockets to suit 6C4 6X4 EL90 $1.50 each
drop me a line if interested , Paypal accepted for internationals
Mullard Cv4003 box anode 12AU7 ECC82 $18 each
Mullard Cv4024 mil-ruggedised 12AT7 ECC81 $13 each
teflon B7a sockets to suit 6C33 6C41 QQVxx $6 each
teflon b8b loctal sockets to suit 3a/167m 7N7 etc $5 each
teflon b7g sockets to suit 6C4 6X4 EL90 $1.50 each
drop me a line if interested , Paypal accepted for internationals
dnewma04 said:Hi, I know this is a very old post, but I have been trying to track down some nice non-ceramic loctal sockets. Any chance there are any still available?
Billington in the UK do PTFE Loctals.
Hi again, as I mentioned previously, my account has too few posts to send email or PM through the site. would you mind sending me an email to dnewma04 at either hotmail dot com or gmail dot com?
I'd appreciate it. I'd be looking for 20 or so (possibly more) loctals and some of the 7 pins for use in a 6C33 amp, not for the 6C33, but for use with the driver stage tubes.
Thank you!
I'd appreciate it. I'd be looking for 20 or so (possibly more) loctals and some of the 7 pins for use in a 6C33 amp, not for the 6C33, but for use with the driver stage tubes.
Thank you!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.