There are a couple of articles on Hybrid Amps at TubeCad,
http://www.tubecad.com/april_may2001/
http://www.tubecad.com/march2001/page20.html
Also some other projects on the web,
http://digilander.iol.it/essentialaudio/index.htm
http://www.homestead.com/whaan/files/index.html
It is something that I would like to try. I am working on a
Hybrid design of my own.
Regards,
Tim.
http://www.tubecad.com/april_may2001/
http://www.tubecad.com/march2001/page20.html
Also some other projects on the web,
http://digilander.iol.it/essentialaudio/index.htm
http://www.homestead.com/whaan/files/index.html
It is something that I would like to try. I am working on a
Hybrid design of my own.
Regards,
Tim.
The Magnatec web site is http://www.magnatec-uk.co.uk
and they seem to sell online.
As far as replacements, the BUZ900P/BUZ905P sould be prity mutch straight interchangable with most of the power mosfets commonly used in audio, you shouldn't need to change the circuit at all.
Some devices you could use are,
Hitachi 2SK1058/2SJ162
Exicon EC10N16/20
International Rectifier I am not very familiar with, but something like IRFP240/IRFP9240 looks about right.
Regards,
Tim.
and they seem to sell online.
As far as replacements, the BUZ900P/BUZ905P sould be prity mutch straight interchangable with most of the power mosfets commonly used in audio, you shouldn't need to change the circuit at all.
Some devices you could use are,
Hitachi 2SK1058/2SJ162
Exicon EC10N16/20
International Rectifier I am not very familiar with, but something like IRFP240/IRFP9240 looks about right.
Regards,
Tim.
Hallo
get a look at my Hybrid One
ciao
Filippo
www.audiofanatic.it
PS the problem on my schematics download area is now fixed
get a look at my Hybrid One
ciao
Filippo
www.audiofanatic.it
PS the problem on my schematics download area is now fixed
May I know how to adjust the bias for the hybrid amp 5687 and magnatec mosfet at
http://www.homestead.com/whaan/files/index.html
website ? ( the first project )
http://www.homestead.com/whaan/files/index.html
website ? ( the first project )
Hybrids are
great. too many audiofreaks tend to favor one type of device and circuit type and completely refuse to consider other options. I've done several tube input stages that have SS output stages, and they sound great.
One of my first hybrid designs is here: http://home.c2i.net/semfielec
look at tube/mosfet amp
great. too many audiofreaks tend to favor one type of device and circuit type and completely refuse to consider other options. I've done several tube input stages that have SS output stages, and they sound great.
One of my first hybrid designs is here: http://home.c2i.net/semfielec
look at tube/mosfet amp
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- tube/solid state hybrid