I get close to zero ohms from pin 1 to case. 200 ohms or 175 Kohms between 3 and 4 as well as between 6 and 7. This is making it hard to equate to a 6ak5 or 6ak6.
Input transformers?
If it were valves, there should only be continuity on the heater pins, not on other elements.
If it were valves, there should only be continuity on the heater pins, not on other elements.
They look like microphone input matching transformers. I would take the can off and have a look.
Pry out the tabs, with care!
Pry out the tabs, with care!
Thanks, I think these may be from some sort of PA equipment. I really wanted them to be a pentode.
- Home
- Amplifiers
- Tubes / Valves
- Tube ID: Octal Metal Can 403A - pinout