• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Tube FS

Status
Not open for further replies.
Jump to Latest
#2
Sch3mat1c said:
was wondering how much money (and when 🙂 ) I could get for a 12AX7, "Made in West Germany", "COMPUTOR TUBE", flat grey plates, diamond base (I'm guessing a Tele relabled for something ENIAC-like 😉 ). Works great.
Click to expand...

I've had pairs of tested used TFK ECC83s go for anywhere from $16 to $33. (n=5)

The most i've gotten is $36 for a pair of Valvo ECC83s

Certainly buys a lot of 6N1Ps 😀

dave
 
#4
Tim,

Last June I sold five used ECC83s on eBay (two Telefunkens, three Mullards) to a gentleman in Thailand for $89, and later two Telefunkens to a gent in Hong Kong for $22. These were tested only by trying them out in amps, if you have any more objective measurements of performance you can get more.

If you allow international bids on your auction on eBay you possibly might find bidders coming in from all over SE Asia , seems to be many valve enthusiasts there.
 
#5
<> ECC83

Hello ,
You would be far better off having the thing tested but saying that I would only expect a maximum of $20 if the print is smudged or worn . You get far more money selling in pairs , especially if construction and test results tally

316a
 
Status
Not open for further replies.
Top Bottom