Hi,
I built an 8200R and fitted it with 2x Golden lion KT88s. If left powered on with no signal input for some time it fails to produce sound on the right channel. If you switch the amp off and on again the channel comes back on.
This is only an annoyance, but I would like to fix it. Anyone got an idea that might help track this down?
Gus
I built an 8200R and fitted it with 2x Golden lion KT88s. If left powered on with no signal input for some time it fails to produce sound on the right channel. If you switch the amp off and on again the channel comes back on.
This is only an annoyance, but I would like to fix it. Anyone got an idea that might help track this down?
Gus
Victor is the North American distributor for your kit and he is trying to help you out. It is easier and more effective to call you on your phone and ask a few questions rather than messages flying back and forth on the forum. You don't need to post your phone here either for your privacy. You can send it via PM or email.
Thank you Cheuh...
please email me your phone number..no one asked you to post your phone number in the forum.
it is quicker to tell you in the phone...
I am happy to help you..
please email me your phone number..no one asked you to post your phone number in the forum.
it is quicker to tell you in the phone...
I am happy to help you..
Or you can try AIM's No clean Cored wire solder. I have an old roll that I bought long time ago for work and it has very little flux residue and it is not even the new no clean core wire.
CX18 No Clean Cored Wire Solder | AIM Solder
CX18 No Clean Cored Wire Solder | AIM Solder
An externally hosted image should be here but it was not working when we last tested it.
