Trends TA-10 Power

[Nappyhead]

I need a little help, and hoping someone can lend a hand. I’m looking to put two Trends amps in one case. My first option was to just use one external power supply, but since I have a large case, I would like to keep the powers supply internal with only one AC power cord.

I’m wondering if I can use two of these:
http://www.autocostruire.com/catalo...d=264&osCsid=0f800fbbd46688cb5367f2052ae29707

and one of these:

http://www.autocostruire.com/catalog/product_info.php?cPath=42&products_id=265

if this will do the trick, or if I would have to add anything?

Thanks in advance

NH

 

[Pano]

Why go all the way to Italy? There are plenty of good power supplies in North America. And they will be 120V 60Hz ready.

You could even use 2 small SMPS, if you want to keep things seperate.

 

[Nappyhead]

I did look at the option of using two seperate power supplies, but I want it all in the case. Can you point me to where I can this stuff on this side of the pond

 

[audiosteve]

I have a similar need. Does anyone know where I can find a reasonably priced 12V~14V SMPS that will put out at least 5 to 6 amps?? Chassis, not wall wart, is preferred.

Thanks in advance for any help.

 

[Andrewbee]

http://apexjr.com


Go to the new section.

Scroll down to almost the end. There are three versions listed. I use the highest current version. Originally used in a fax machine iirc.

Andrew

 

[audiosteve]

Thank you Andrewbee, that looks good. and the price is certainly right. I will probably order one tomorrow.
I also found thise:
Ebay item 230196513004 sold by Sure Electronics
It costs more but seems to be smaller.