Hi I am a new guy here from the uk.
Just undertaking my 4th project in building a T-line set up, consisting of 4 cabinets.
2 housing the 2 150mm bass drivers, and the the other 2 cabinets housing the mid and upper units.
Due to the similar nature of t-line and closed box, the smaller mid cabinets are of that design.
The project will take me probably a few years due to funds and the fact that the units have a total of 22drivers and use a three way active crossover.
I work as a furniture designer, and design (I say design, I have adapted an older design that I designed probably 10 years a go now) loudspeakers when I can. I have been working on this design for the last three years on paper/autocad/solidworks programming, changing and generally faffing with mainly the cosmetic side.
Anyway, I am not expert so, no doubt I will be asking a few questions along the way, pleased to meet you all
Graham
Just undertaking my 4th project in building a T-line set up, consisting of 4 cabinets.
2 housing the 2 150mm bass drivers, and the the other 2 cabinets housing the mid and upper units.
Due to the similar nature of t-line and closed box, the smaller mid cabinets are of that design.
The project will take me probably a few years due to funds and the fact that the units have a total of 22drivers and use a three way active crossover.
I work as a furniture designer, and design (I say design, I have adapted an older design that I designed probably 10 years a go now) loudspeakers when I can. I have been working on this design for the last three years on paper/autocad/solidworks programming, changing and generally faffing with mainly the cosmetic side.
Anyway, I am not expert so, no doubt I will be asking a few questions along the way, pleased to meet you all
Graham
Hi Graham,
Although I am not by way of any official, as another Member, welcome to the Forum.
You will see that there is quite a bit of interest in TLs here, and there have been a few threads quite recently with various comments on TL designs, so hopefully you should feel at home here.
Regards,
Although I am not by way of any official, as another Member, welcome to the Forum.
You will see that there is quite a bit of interest in TLs here, and there have been a few threads quite recently with various comments on TL designs, so hopefully you should feel at home here.
Regards,
Hi Graham,
Not sure about "perfect"
, but there is a lot more interest on this Forum than I had appreciated until I posted in a couple of TL-oriented threads a few days ago.
If you come across it, I referred to the fact that I have had an 'ultimate' TL design of my own on the drawing-board (drivers in stock, chipboard all cut) for well over 20 yrs.
I hope yours gets finished quicker than this.
Regards,
Not sure about "perfect"
If you come across it, I referred to the fact that I have had an 'ultimate' TL design of my own on the drawing-board (drivers in stock, chipboard all cut) for well over 20 yrs.
I hope yours gets finished quicker than this.
Regards,
grahamfocal said:she (the wife) has been very good I suppose, because when we move, and I have saved up my pocket money! she has given way to me getting pretty much what I want, hi-fi wise. she is a good egg![]()
Oh, I can't complain about my wife either with all of the gear I usually have in the lounge, but my girlfriend, that's another matter!

Welcome to the forum.
Come on. Please don't tease. Let's see some visualizations
dave
grahamfocal said:been working on this design for the last three years on paper/autocad/solidworks programming, changing and generally faffing with mainly the cosmetic side.
Come on. Please don't tease. Let's see some visualizations
dave
It may take a while now to get them complete, new baby on the way in March, so they are on hold at the moment
I will try over the next couple of weeks to get a pic of the upper range cabinets (that I have drawn on solidworks) on here, if I know how.
Cheers for the interest

I will try over the next couple of weeks to get a pic of the upper range cabinets (that I have drawn on solidworks) on here, if I know how.
Cheers for the interest
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Member Areas
- Introductions
- transmission lines