Coke has been shown in videos as a scale cleaner for porcelain toilet bowls, so I think it was in context.
I have not tested it personally for that purpose, I prefer Indian flavors and non fizzy drinks. So I would have to buy Coca Cola and try cleaning toilets.
Due to its high sugar content and fizzy nature, it is said to be a potent spermicide, so some comments have been about using it after sex as a birth control agent.
Convincing the lady to put the stuff in her private parts could be difficult.
I have not tested it personally for that purpose, I prefer Indian flavors and non fizzy drinks. So I would have to buy Coca Cola and try cleaning toilets.
Due to its high sugar content and fizzy nature, it is said to be a potent spermicide, so some comments have been about using it after sex as a birth control agent.
Convincing the lady to put the stuff in her private parts could be difficult.
If you have a bench-top variable DC power supply you can easily remove ALL the rust using electrolytic derusting.
I'm not sure if that is a good or bad thing for transformer laminates though.
I'm not sure if that is a good or bad thing for transformer laminates though.
Things to consider are roughness and flatmess.
Curved surface will induce hum, and a pitted surface will not couple properly, so eddy current and hystereris losses may be high.
For an audio amp running 4 hours a day, and with conservative load, not a big problem.
Process is called electropolishing, reverse the polarity with respect to that used for plating.
You may need to use a surface cleaning agent like mild acid before starting the process.
Curved surface will induce hum, and a pitted surface will not couple properly, so eddy current and hystereris losses may be high.
For an audio amp running 4 hours a day, and with conservative load, not a big problem.
Process is called electropolishing, reverse the polarity with respect to that used for plating.
You may need to use a surface cleaning agent like mild acid before starting the process.