I can't help but the following may be helpful for those who may have a source:
*measure the primary and secondary voltages to get a primary to secondary ratio
*pin spacing for the terminals (between terminals in a row and between terminals in one row to the other row)
*operating frequency of the power supply (taken from windings, not from the oscillator pin of driver IC).
*measure the primary and secondary voltages to get a primary to secondary ratio
*pin spacing for the terminals (between terminals in a row and between terminals in one row to the other row)
*operating frequency of the power supply (taken from windings, not from the oscillator pin of driver IC).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.