totem pole substitution

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hey all, I just invented smth but i am scaried because these two voltage dividers give 6v and if oscillation stops, both fets gonna hell conducting ..

another possib. is before oscillation starts and actually this means its impractical to use :(

any opinions ?

i tested it versus normal wiring but not tested versus real totem pole.
anyway it is totem pole itself but uses internal transistors :) and saves 2 bjts

tommorow will find out if there is a difference between 1.5$ mosfet driver and a totem pole for free :)
 

Attachments

  • nice.PNG
    nice.PNG
    20 KB · Views: 89
  • totem pole.PNG
    totem pole.PNG
    80.8 KB · Views: 85
  • even better.PNG
    even better.PNG
    19.5 KB · Views: 89
Last edited:
I see totem pole not solves both fets conduction and I realized that if I use 6v instead of 12 for the fets, the cross point where fets conduct will not be 5.6v but 2.8 and they are not gonna conduct at 2.8 :)

I think 6v is enough for good fet saturation
 

Attachments

  • this_way_2.PNG
    this_way_2.PNG
    16.8 KB · Views: 69
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.