It takes about a minute for the FET to reach steady state. So on average 1.5 minutes per FET, plus calibrating the muiltmeter using a dedicated current source every 10 FETs, to make sure that the readings are consistent to +/- 5uA.
As said, results to follow.
All thanks for the GB should go to Mark. I did all the interesting technical stuff. He ended up with all the boring things like packing & posting, writing invoices and custom declarations, printing address labels, .......
I take no credit.
Patrick
As said, results to follow.
All thanks for the GB should go to Mark. I did all the interesting technical stuff. He ended up with all the boring things like packing & posting, writing invoices and custom declarations, printing address labels, .......
I take no credit.
Patrick
there is a possibility to have some heatsink ?
at last two x my phono....
2sk up 10ma are interesting for me
at last two x my phono....
2sk up 10ma are interesting for me
EUVL said:
I am used to being faster than anyone else, even the Postman knows that😀
BTW I have a hard time figuring out how you can cut those things so precisely? This is extremely small tolerance, indeed!
🙂
Google "wire cut EDM".
The process is capable of cutting to less than 5um accuracy.
The difficult thing here is how to do this for 2 Euros !!
😉
Patrick
The process is capable of cutting to less than 5um accuracy.
The difficult thing here is how to do this for 2 Euros !!
😉
Patrick
Thanks again
For those interested in matching statistics, I just published our results here :
http://www.diyaudio.com/forums/showthread.php?postid=1730586#post1730586
Patrick
http://www.diyaudio.com/forums/showthread.php?postid=1730586#post1730586
Patrick
mail returned
Kang,
Something wrong with your email address - system abuse or something!
Can send up 4 sinks, no problem - address?
Kang,
Something wrong with your email address - system abuse or something!
Can send up 4 sinks, no problem - address?
All the US member's packages have been mailed as of today. You each owe me $2. If you need my PayPal address, just send me a message.
I'll have the cost for the two Canadian packages tomorrow.
Thanks!
I'll have the cost for the two Canadian packages tomorrow.
Thanks!
> All the US member's packages have been mailed as of today.
😉
Only Sweden and Italy still pending, or you have also received your sinks ?
Patrick
😉
Only Sweden and Italy still pending, or you have also received your sinks ?
Patrick
France 's been served yesterday 😀
Awesome little thingies ! (and overengineered packaging too 😉 )
Thanks Patrick and Mark for all your efforts and quickness. Nice to deal with you.
Cheers
Awesome little thingies ! (and overengineered packaging too 😉 )
Thanks Patrick and Mark for all your efforts and quickness. Nice to deal with you.
Cheers