I have a 2ru rack mount power supply for a large DDA Brand console that might be a nice supply for a Pass DIY project.
There is a 20Vct Toroid inside with a large regulator system that supplies +/- 18Vdc at 3 amps per, 6 amps total. also 48vdc at 250ma
The regulator board needs repair. some parts have been removed. thats all i know about it. The pass transistors are there but some smaller TIP types have been removed. Sorry no schematics or other info.
I am willing to remove just the transformer if someone only wanted that part. But i think it would be more interesting with the regulator for a project.
I need to look and see if i have the top cover for the rack box. not sure if its in the pile or not.
Whole thing $40 plus shipping. $30 for just the transformer.
There is a 20Vct Toroid inside with a large regulator system that supplies +/- 18Vdc at 3 amps per, 6 amps total. also 48vdc at 250ma
The regulator board needs repair. some parts have been removed. thats all i know about it. The pass transistors are there but some smaller TIP types have been removed. Sorry no schematics or other info.
I am willing to remove just the transformer if someone only wanted that part. But i think it would be more interesting with the regulator for a project.
I need to look and see if i have the top cover for the rack box. not sure if its in the pile or not.
Whole thing $40 plus shipping. $30 for just the transformer.
Got pics?
Got any pictures of the 2RU case?
I don't really need the transformer, but will buy both if required.
Got any pictures of the 2RU case?
I don't really need the transformer, but will buy both if required.
Photos
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
ZeroCool,
from the other thread:
"I have a 40Vct 6 amp transformer forsale!
See: http://www.diyaudio.com/forums/show...threadid=130595"
If thats a 20vac-ct-20vac at 6amps, (~240VA) and has two (2) 115vac primaries, then I'm your buyer.
(see graphic below) Offer is $25 and I pay shipping, cheapest, (ground) USPS to zipcode 94087.
Will PayPal immediately on confirmation and your PayPal account. Can also send cashiers check, if you prefer.
Let me know via site PM/email, if this works for you...
Thanks!
from the other thread:
"I have a 40Vct 6 amp transformer forsale!
See: http://www.diyaudio.com/forums/show...threadid=130595"
If thats a 20vac-ct-20vac at 6amps, (~240VA) and has two (2) 115vac primaries, then I'm your buyer.
(see graphic below) Offer is $25 and I pay shipping, cheapest, (ground) USPS to zipcode 94087.
Will PayPal immediately on confirmation and your PayPal account. Can also send cashiers check, if you prefer.
Let me know via site PM/email, if this works for you...
Thanks!
Attachments
Bichi,
Your email is set to admin only. i cant email you. But YES this is exactly as your picture describes! email me at tetech2@doitnow and lets do it up!
Zc
Your email is set to admin only. i cant email you. But YES this is exactly as your picture describes! email me at tetech2@doitnow and lets do it up!
Zc
both site PM/email and email sent with shipping address.
- used your stated address with "dot com" added
Thanks!
bichi
- used your stated address with "dot com" added
Thanks!
bichi
PayPal Payment sent, $45 for "whole thing..."
- Oct 03, 2008 10:00pm PST.
- shipping address included in email to you.
- (Unique Transaction ID #7BU54832J6959212W)
Thanks!
bichi
- Oct 03, 2008 10:00pm PST.
- shipping address included in email to you.
- (Unique Transaction ID #7BU54832J6959212W)
Thanks!
bichi
- Status
- Not open for further replies.