i have trouble implementing the celestion.
if you want resonable efficientie ,say 103db then you lose extension upwards,so then you might aswel make a br box for it.
the problem is with 98 db efficientie compare to the 104 db eff off the selenium ,makes the celestion week, maybe absolete.
i sugest to bild the br for now and buy a few 8 or 6"drivers later on.
if you want resonable efficientie ,say 103db then you lose extension upwards,so then you might aswel make a br box for it.
the problem is with 98 db efficientie compare to the 104 db eff off the selenium ,makes the celestion week, maybe absolete.
i sugest to bild the br for now and buy a few 8 or 6"drivers later on.
So the celestion is out of the picture.
Can we use the beta8" on top of the selenium
Can we use the beta8" on top of the selenium
Last edited:
Just did a quick check. 6" and 8" drivers are cheap out here, I can get celestion, pyle, selenium and eminence.
Thanks erik
Thanks erik
with 4 dayton in a box you can play crossing 200 herz, to 1000hz(probaply higher)
and well change the selenium from 60 up(wich i think is to low ,80 wil give you that chest punch ,60 hz is where some woofers start to work)
jbells ss15
you know how a scoop sounds,they fall of @ 50 hz wo eq
and well change the selenium from 60 up(wich i think is to low ,80 wil give you that chest punch ,60 hz is where some woofers start to work)
jbells ss15
you know how a scoop sounds,they fall of @ 50 hz wo eq
Last edited:
2 per box in a design like jbell hs top are the 3s array design topMUNSON Professional Audio-Line Array, Loudspeaker, Amplifier and Digital products.
Yes the hf will go on top
Yes the hf will go on top
Last edited:
new day 🙂
the s3 aray box is nothing more then a bassreflex box with a hf driver in the middle.
efficientie is about 10 db down on a real horn.= to low.
you need an exponential horn
we could design it with a hf horn in the midlle,then i need dimensions of the hf horn to compensate the mouth area.
the s3 aray box is nothing more then a bassreflex box with a hf driver in the middle.
efficientie is about 10 db down on a real horn.= to low.
you need an exponential horn
we could design it with a hf horn in the midlle,then i need dimensions of the hf horn to compensate the mouth area.
i discovered a flaw in the dayton 6" ts parameters,result is lower output in the 700 to 1000 hz area😡
the cheaper dayton 6" work better but you deff need 4 per box.
hf in the horn wil only work if we now what horn were using,so you better make a seperate hf box for that.
the cheaper dayton 6" work better but you deff need 4 per box.
hf in the horn wil only work if we now what horn were using,so you better make a seperate hf box for that.
- Status
- Not open for further replies.