Or the 4 ohms are rated at 2.83 volts
so it looks higher.
So 2 watts not 1 watt
so the rating looks higher.
People like to tune high to make the graph
look pretty on the screen.
Or basically try to weasel 3 dB with high tuning
Where ever you tune that were the speaker stops moving.
under that unloading
Since EQ will add 3 to 6 dB or whatever you add.
reflex or passive is more for cone control.
so tuning be below Fs for cone control.
Eq is the boost.
QB3 usually put you above Fs.
So BB4 tunes to Fs
-3EBS goes below.
about 2 minutes to sim
hit BB4 or EBS
most the work is calculating the weight.
Fs seems to be 41 Hz actually fairly respectable
so it looks higher.
So 2 watts not 1 watt
so the rating looks higher.
People like to tune high to make the graph
look pretty on the screen.
Or basically try to weasel 3 dB with high tuning
Where ever you tune that were the speaker stops moving.
under that unloading
Since EQ will add 3 to 6 dB or whatever you add.
reflex or passive is more for cone control.
so tuning be below Fs for cone control.
Eq is the boost.
QB3 usually put you above Fs.
So BB4 tunes to Fs
-3EBS goes below.
about 2 minutes to sim
hit BB4 or EBS
most the work is calculating the weight.
Fs seems to be 41 Hz actually fairly respectable
Last edited: