Hello All,
Regarding biamped MTM designs, which approach is better -
A stepped front baffle, or
a flat baffle and the tweeter delayed, and if delayed,
what passive or line level delay circuit approach is best.
Has anybody tried mounting a modern car audio surface mounting pod tweeter in front of a
suitable say 5" or 6 1/2", ala old car coaxial designs, and passively or actively delaying the tweeter ?.
Eric.
Regarding biamped MTM designs, which approach is better -
A stepped front baffle, or
a flat baffle and the tweeter delayed, and if delayed,
what passive or line level delay circuit approach is best.
Has anybody tried mounting a modern car audio surface mounting pod tweeter in front of a
suitable say 5" or 6 1/2", ala old car coaxial designs, and passively or actively delaying the tweeter ?.
Eric.
i'd tend to lean toward a flat baffle with time delay to avoid more difraction problems....... I'll leave it to the TDR twins Harry and Jocko to tell you the rest of the story.
- Status
- Not open for further replies.