anyone have a source for Threshold T800 schematics??
I have a sick patient on my bench. One channel draws high AC line current around 30-40 volts when bringing it up on a variac. It had blown the 15 amp line fuse previously so i suspect the worst. the other channel runs but oscillates. found 2 burned resistors on the board.
No burned parts on the channel that draws high current.
Could really use some schematics
Zc
I have a sick patient on my bench. One channel draws high AC line current around 30-40 volts when bringing it up on a variac. It had blown the 15 amp line fuse previously so i suspect the worst. the other channel runs but oscillates. found 2 burned resistors on the board.
No burned parts on the channel that draws high current.
Could really use some schematics
Zc