Threshold SA/12e

[Danish]

I have just purchased a pair of Threshold SA/12e mono blocks. One of the power fuse holders broke in transit. Does anyone know where I can purchase the original parts? Maybe Nelson has a lead for me?
These amps are true monsters and I am looking forward to putting them to use 🙂

Nelson, how many SA/12e were produced? (approximately if you don't remember exactly) and how many were made in black versus natural finish?

Thanks,

Michael

 

[jam]

Michael,

Post a picture of the fuseholder. I have sone Threshold chassis that might have the same part.

Regards,
Jam

 

[Danish]

Jam,

Let me see - I hope I am attaching the image correctly.

Michael

 

[Danish]

It seems like moderation (I am still a new user) removed the attached picture.

 

[docjoe]

Michael,

Post a picture of the fuseholder. I have sone Threshold chassis that might have the same part.

Regards,
Jam

hi
by any chance, would you have a pair of stasis II pcbs? even bare?
i've burnt some tracks in the process of troubleshooting mine, which by the way works fine again, thanks!

would really appreciate!
joseph

 

[Nelson Pass]

Actually, just let us know the diameter of the mounting hole.

As to quantity, somewhere between 500 and 800. Black
and silver tended to something like 60/40.

 

[jam]

Michael,

I have that fuseholder. Just e-mail me your address and I will send it to you.

Regards,
Jam

 

[jam]

Docjoe,

I only have Stasis 3 pc boards.

Regards,
Jam

 

[docjoe]

arent'they the same?

the only difference i know being the total amount of output transistors?
nelson?

anyway mail me an offer if you'd like to sell
thanks

joseph

 

[Danish]

Jam,
That sounds good! I will email you my address as soon as I get back from a trip overseas ( I am currently in Europe).

Cheers,

Michael

 

[Danish]

Nelson,

I will make sure to measure the mounting hole as soon as I return to San Francisco. I might be interested in buying a few spares since this might happen again in the future?

Thanks,

Michael

 

[Nelson Pass]

We use Schurters which take a .5 inch diameter hole, and always
keep a bunch around.

 

[docjoe]

Jam.
I'm still needing those Stasis 3 PCB you told me about!
Are you willing to sell them?
If so, tell me your price.

regards
docjoe.

 

[a.wayne]

Threshold Sa-12e monoblocks

Question :

In the sa12e there are 2 trannies , how are they configured ? 1 per rail or both run in parallel ?

Supposedly idle is at 1000 watts.

 

[Nelson Pass]

I don't think they idled that high.

😎

 

[a.wayne]

Hi Nelson ,
What about the 2 trannies , Parallel or one per rail ?

 

[Nelson Pass]

I forget.

😎

 

[DrKarl]

one per rail, look here page 8: https://elektrotanya.com/threshold_sa_12e.pdf/download.html