Threshold s150 amp need parts

Status
Not open for further replies.
Here is the story

I mostly work on guitar amps, most vintage to ancient, for players that use vintage gear, build, mod and repair studio gear and mike preamps.

I did build line amps and power amps, then got swamped with guitar amps from collectors, so rare that I have a nice vintage or audiophile amp or line stage in to work on.

I have a few friends that send their vintage or audiophile gear to me only, as they do not trust other techs in So Cal.

I now have a Threshold FET 2 preamplifier, which I have finished with, and now I have his Threshold S150 amp, that works fine, but after the check and clean up, out I found this.

Pic S150_pre_work_c shows a radial cap on the PC board

I need to replace both of these small radial caps, from Instrument devices, marked C221-1705.

Can youse guys tell me what the value is?

I tried my trickle cap charger, and they both failed.

The customer also wants new 15,000/80 volt caps and a new Schottky or IXYS rectifier bridge, to upgrade the PS.

Any help, Big Thanks!
 

Attachments

  • S150_pre_work_a.jpg
    S150_pre_work_a.jpg
    198.4 KB · Views: 230
  • S150_pre_work_c.jpg
    S150_pre_work_c.jpg
    163 KB · Views: 214
  • S150_pre_work_d.jpg
    S150_pre_work_d.jpg
    229.6 KB · Views: 198
  • S150_pre_work_e.jpg
    S150_pre_work_e.jpg
    179.9 KB · Views: 223
Status
Not open for further replies.