thickness base aleph??

[rwagter]

Hi,

really getting into building the aleph5 and I was wondering what thickness the baseplate should be.

My setup:
2 500 VA trafo's (8 kg)
small stuff (2-3 kg)

the dimensions are 29,6 x 26,2 cm.

Is 4 mm Al thick enoug to withstand bending (the heatsink will be axially mounted with L-bars) because I can order this quite ease and any thicker is problematic 😕 .

Ralph

 

[Mad_K]

should be just fine!

mine is 2mm aluminium.... (Aleph 30)

http://diyaudio.com/forums/showthread.php?s=&threadid=6966

I also used L-bars to assemble the chassis, -it really mekes it a lot more rigid..

I also have a 600VA toriod mounted on the 2mm frontplate..

😉

 

[rwagter]

My toroid will be on the baseplate so the total weight is on this 🙁


Ralph

 

[Mad_K]

doesn't matter!

if you build it like mine and
http://www.passdiy.com/gallery/aleph2-p1.htm
the L-profiles helps alot.
If you don't think it's stiff enough, you could also incude some braces (more 4mm Al?) across the bottom under the toroids.

 

[Peter Daniel]

4mm should be fine. Placing feet in proper spots might be helpfull too.

 

[BrianGT]

Hi,

really getting into building the aleph5 and I was wondering what thickness the baseplate should be.

My setup:
2 500 VA trafo's (8 kg)
small stuff (2-3 kg)

the dimensions are 29,6 x 26,2 cm.

Is 4 mm Al thick enoug to withstand bending (the heatsink will be axially mounted with L-bars) because I can order this quite ease and any thicker is problematic 😕 .

Ralph

I am using 4mm 6061 aluminum for my chassis with heatsinks mounted to it and it is very solid. I placed 2 - 7kg transformers and it didn't even bend.

--
Brian